Payment & Shipping Terms:
RF data module,
433mhz transmitter and receiver module
433mhz RF Module JZX874A/B /Micro Power With High quality and Free Antenna
JZX874A/B work for the conventional model, that module into the computer, install the driver software, the main
good, it is in receive mode; you also may be sending data.
Module with PC connections:
Methods of operation
1. on the computer to install "JZ-USB Driver"
2. JZX874A/B between the module and the PC, select the serial port used.
3. the radio detection, when the check to the station (the software will prompt detection success), you can read
or change a single parameter. 4, change the parameters, when you select a parameter you want to
set, after set up to read again, to see the parameters of the module is not what you want.
Note: Two or more modules to communicate, then the frequency of the station modules and air rate must be consistent.
Module to communicate with user equipment, the module's serial port parameters and user settings must be consistent.
JZX874A/B wireless module with all the JZX87 series of models to communicate with each other.
Communications as long as you pay attention to the following:
A. select all the modules to communicate with each other the same channel.
B. you have the same communication module of the air rate.
C. the communication module, power supply, interface connection is connected
Contact Person: Miss. Candy
Tel: 86 755 86714296